Skip to content

Cold storage hanging suspension

Insulated panel roof and walls can be suspended using several different methods. The most common solution across Australia is the use of wire rope suspension systems. Fully rated and quick to install these solutions are tried and tested in hundreds of installations across the country.

Gripple can supply a number of IPCA certified systems ideally suited to cold storage roof panel suspension. Designed to reduce labour requirements during installation, wire rope suspensions provide a cost effective, readily available solution.

For more information please visit www.polyplas.com.au

Cold Storage & Cold room Suspension Install Projects

Gripple products has been utilised on an extensive number of high-profile job sites that include food & beverage industry, healthcare facilities, liquor stores, supermarkets & transportation services projects across New Zealand.

Our in-depth knowledge coupled with our experienced engineers allows us to deliver properly-engineered bracing solutions. Here are projects Gripple Cold Room Hanging Suspension have been installed. For more information or details regarding completed projects, please contact the Polyplas International Area Manager in your region.

  • Food Service Industry
    Meat
    Poultry
    Produce
    Seafood
  • Beverage Industry
  • Liquor Stores
  • Supermarkets
  • Transport

Cold Storage Products

Standard hangers have been used on countless installations across the country offering simple adjustment to perfectly balance all panels. Lockable hangers provide the added feature of locking the wedges in place preventing further adjustment. Both provide high load ratings of up 325kg per hanger with a 5:1 safety factor.

C-Clips

A choice of end fixings are available to secure the wire rope to beams or ceilings depending on the specific requirements.

Standard Hanger

A wide range of panel mounting options are available and held in stock in our Auckland, New Zealand based warehouse depending on the panel size and any relevant specifications to provide a secure, visually clean installations.

Industry Approvals & Certifications

  • AS1170.4 and NZS4219 compliant
  • In accordance with ANSI/ASHRAE 171
  • OSHPD OPA 2123-10
  • UL NEBS GR 63 Core Certification
  • SMACNA Verification
  • International Building Code (IBC)
  • California State Building Code
  • National Fire Protection Association (NFPA)
  • American Society of Civil Engineers (ASCE) 7-05 Chapter 13
  • Unified Facilities Criteria (UFC) 300 and 400
  • American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE)
  • Federal Emergency Management Agency (FEMA)
  • Engineered seismic bracing calculations and details based upon drawings/plans provided
  • PE stamped layout drawings for each service noting the proper location of Gripple Seismic Cable Bracing and/or Vibration Management products (spring mounts, vibration isolation pads, hangers, and accessories), per the scope of the project.

Latest News

Gripple Seismic 19 & 25

Gripple Seismic Bracing Secures New Build

Gripple’s seismic bracing systems have been expertly installed in Auckland, providing robust support and ensuring…

Read more
Back To Top